Advertisement
8. Open the self-fastening strap and attach the zipper
holding clip to the zipper pull as shown.
ZIPPER HOLDING CLIP
9. Reinstall the self-fastening strap when done.
<Appearance when properly installed>
2 of 3
SELF-
FASTENING
STRAP
ZIPPER PULL
0SP36-HL5-201, 0SP36-HL3-202, 0SP36-HL4-202
Connect the front and rear wheel straps
1.
Pull the cover down past the wheels as low as
possible.
2. Take one of the straps connecting the corner cam
buckles near the front wheels, and while pushing
down on the buckle tab, pass the strap through the
back and under the tab as shown.
3. Repeat Step 2 the on the straps near the rear wheels.
4. Pull the straps so that the tension is even on both
sides.
5. Repeat steps 2 through 4 for the rear wheel straps.
Connect the compression straps
1.
Starting on the passenger side, take the metal ring
with the three straps attached and pass the #1
compression strap through the #1 loop at the front
of the cover. Continue passing the compression
strap over the vehicle and through the #1 loop on the
driver's side.
#1 COMPRESSION STRAP
#1 LOOP
© 2016 American Honda Motor Co., Inc - All Rights Reserved.
Advertisement
