Transport And Storage - Trotec BH30 Operating Manual

Technical data
Parameter
Model
Article number
Control range
Accuracy
Measuring interval
Switching capacity
Resistive load
Inductive load
Socket
Mains connection
Connection plug
Protection class
Protection type
Battery
Operating conditions
Storage conditions
Weight
Dimensions
Scope of delivery
• 1 x Device BH30
• 1 x 3 V CR2032 button cell battery
• 1 x Quick Guide
EN
Value
BH30
6,100,004,205
20 % RH to 90 % RH
± 5 % RH
10 s
16 A / 3680 VA
9 A / 2070 VA
CEE 7/3 (Schuko socket type F)
230 V / 50 Hz
CEE 7/7 (plug type F + E)
I
IP30
1 x 3 V CR2032 button cell
5 °C to 35 °C with max.
95 % RH (non-condensing)
-10 °C to +50 °C with max.
80 % RH (non-condensing)
165 g
126 mm x 68 mm x 76 mm

Transport and storage

Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
For transporting the device, use the transport case included in
the scope of delivery in order to protect the device from external
influences.
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• protected from dust and direct sunlight
• For storing the device, use the transport case included in
the scope of delivery in order to protect the device from
external influences.
• The storage temperature is the same as the range given in
the Technical data chapter.
• Remove the battery from the device.
socket hygrostat BH30 5