Table of Contents
Advertisement
Abuse of Camera IS NOT covered under warranty. Fire Cam
warrants its products against defects in material or workmanship for
12 months from date of purchase unless otherwise specified. The
Fire Cam Mini HD and the Fire Cam 1080 Fire Helmet Cameras
warranty are limited to the replacement or repair of the defective
item at no charge if we determine the item to be defective. This
warranty shall not apply to any item subject to misuse including
such as failure by buyer to follow instructions, product modification,
ordinary wear and tear, negligent or improper operation. Abuse of
camera, cable or accessories IS NOT covered under the warranty.
Fire Cam products are not recommended for concrete training
towers or flashover chambers where it could sustain high temps for
long periods of time. Electronic damage due to over-voltage,
incorrect polarity from product power supplies, or incorrect MAINS
voltage is not covered under the warranty. DO NOT USE ANY
AFTERMARKET CHARGERS FOR YOUR CAMERAS. Fire Cam
chargers are designed specifically for Fire Cam's only. Modification,
repair, or attempted repair by anyone other than Fire Cam or
without the written permission of Fire Cam will void this warranty.
This warranty covers the cost of factory repair, labor and parts on
eligible equipment which is returned. Equipment, which is repaired
under this warranty will be returned freight prepaid. If it is
determined that the Fire Cam does not need repair, the purchaser
shall pay for return shipping charges. Disclaimer: Fire Cam does
not assume any responsibility for any accidents or injuries incurred
to the user of the Fire Cam Fire Helmet Camera.
WARNING!
Firefighting is a dangerous activity and should only be performed by
a trained professional. The end user of Fire Cam products assumes
all responsibility connected with the use of this product including but
not limited to continuing education, and activity that conforms to
local Standard Operating Procedures. Neither the manufacturer nor
any distributor assumes any liability for injuries sustained while
using Fire Cam products. The Fire Cam® Fire Helmet Cameras™
are manufactured of anodized aluminum, and may retain heat for
several minutes after being exposed to a heated environment such
as a structure re or training re so it needs to be handled with care.
Advertisement
Table of Contents
