Table of Contents
Advertisement
Take a Video
To take videos with the Fire Cam MINI 1080, move
Mode Switch to desired video resolution 720p or
1080p on back of camera. Turn on the camera by
pressing the Power button until the light comes on.
The camera will beep 3 times and vibrate and then
will automatically start recording. The red LED will
blink while the video is recording. Press the button
again to stop recording and enter standby mode.
Recording can be started again by pressing button.
To turn off the camera, hold the button down until
the camera starts beeping. It will beep 6 times and
vibrate before shutting off.
Take Still Pictures
To take still pictures with the Fire Cam MINI 1080, move
Mode Switch to left side for photo mode. Turn on the Fire
Cam MINI 1080 by pressing the Power button.
The camera will automatically start taking photos and the
red LED will blink. Press the button again to stop taking
photos and to go back to the standby mode.
In photo mode the Fire Cam MINI 1080 will take photos
every 3 seconds. It stops automatically if the battery is
empty or if the micro SD card is full.
Advertisement
Table of Contents
