Table of Contents
Advertisement
Product size: 86 x 30 x 30 mm
Weight: 94g
Operating System (for USB drive):
Win ME, 2000, XP, Vista, Win 7, Win 8; Mac OS X 10.6+
Mounting BlackJack Holder
With set screws loose, fit the BlackJack mount on the right or left
brim of the fire helmet. It can be installed above the brim or below
the brim depending on the view from your camera. Snug the 2 set
screws on the brim BEING CAREFUL NOT TO OVER TIGHTEN.
Place the camera inside of the BlackJack mount making sure the
button is on the top and camera is level. Tighten down the set
screw to hold the camera BEING CAREFUL NOT TO OVER
TIGHTEN. If the set screw starts to make marks on the camera, this
will not damage the integrity of the unit. A small piece of black tape
can help limit the marks.
WARRANTY / DISCLAIMER:
Advertisement
Table of Contents
