General Care & Cleaning - LIW BAFFIN neoSIT HL Manual

9. General Care & Cleaning
Baffin neoSIT HL - orthopaedic seat for children, stabilising the back and head is a mechanical device with the supporting
structure made of steel and aluminium covered with powder coating. There are sponge-foam inserts fixed on to the metal
structure. The foam inserts are enclosed with covers made of textile fabrics.
It is important that the equipment is kept clean and regularly maintained in accordance with these instructions.
NOTE! THE DEVICE IS NOT WATERPROOF. DO NOT ALLOW FOR DIRECT
CONTACT WITH WATER. THE DEVICE IS FOR INDOOR USE, AT ROOM
TEMPERATURE. DO NOT EXPOSE IT TO DIRECT CONTACT WITH WEATHER
CONDITIONS.
Cleaning and maintenance recommendation
Paint coatings and plastic covers should be cleaned with a damp cloth. Mild household detergents can also be used.
The upholstery we offer is made of a special breathable fabric. It is produced in accordance with the OEKO-TEX
STANDARD100 standards, which confirm complete security of the users, including children. The fabrics used in upholstery
covers are free of harmful substances such as: pesticides, chlorophenols, formaldehyde, causing allergy dyes, forbidden azo
dyes and extractable heavy metals.
OEKO-TEX STANDARD100 mark is granted for only for fabrics where all components at each manufacturing stage have been
tested and obtained positive results.

Do not wash covers with sponges inside.

Covers should be either hand washed or in a washing machine at the max temperature of 40C.

For washing you should use delicate detergents with appropriate attestation in proportions on the packing.

For children with allergies, use mild soap or special detergents.

To remove excess water – use short spin cycle, do not wring.

Drying – hang to dry at room temperature. DO NOT TUMBLE DRY.
NOTE! WHILE WASHING THE UPHOLSTERY COVERS, EXTRA ATTENTION SHOULD
BE PAID TO THE VELCRO FASTENERS. TO PREVENT ANY DAMAGE, ENSURE THE
VELCRO FASTENERS ARE REMOVED SO THAT THEY DO NOT COME IN TO
CONTACT WITH THE UPHOLSTERY.
NOTE! DO NOT WASH WITH THE FOAM INSERTS INSIDE.
Sponge-foam filling:
- vacuum mechanically or by using soft-bristled brush.
- it is acceptable to wash with a damp cloth and a mild detergent; dry thoroughly at room temperature.
Disinfection
In case the device is used by more than one person (i. e. in a rehabilitation centre), disinfectants should be used. For
manual disinfection it is advisable to use INCIDIN PLUS in solution 0,25% - 0,5% or similar disinfectant.
Follow instructions given by the manufacturer.
Hint: before the disinfection process, clean both the upholstery and handles.
Baffin neoSIT HL Edition 1 24