Page 1
INSTRUCTIONS FOR USE TravelSit edition 1 - 23.03.2019...
Page 2
NOTE! THE MANUFACTURER IS SOLELY RESPONSIBLE FOR THE EQUIPMENT PURCHASED DIRECTLY FROM THE LOCAL REPRESENTATIVE OF LIW CARE TECHNOLOGY OR IN A SPECIALISED MEDICAL SHOP REPRESENTING LIW CARE TECHNOLOGY IN POLAND. NOTE! IF POSSIBLE, THE PACKAGING OF THE PRODUCT SHOULD BE RETAINED IN CASE WHEN IT WOULD PROVE NECESSARY TO SHIP THE PRODUCT WITHIN THE SCOPE OF WARRANTY REPAIR.
All means of transportation are characterised by a limited luggage space. We have created the TravelSit so that you no longer have to face the dilemma of choosing between the safety and the comfort of your child. The TravelSit will always be there when you need it, enabling your child to enjoy the comfort.
The TravelSit orthopaedic seat for children stabilising the back and the head is designed for people, who are between 85 and 110 cm tall and whose weight does not exceed 60 kg. The TravelSit can be used for people with abnormal posture and muscular dysfunction.
Width of the seat 17 – 24 22 – 35 Depth of the seat Width of the side support 16 – 22 23 – 30 Height of the side support 8 - 26 13 - 35 TravelSit page 6 edition 1...
Detailed description concerning the regulation and the adjustment TravelSit is comprised of a system of belts, supports, cushions, brackets, etc. connected with various velcro-types tightening sets. This allows to apply multiple configurations to the device and adjust the device to the anatomical structure of the user by altering the position of the system's elements on various heights and widths of the base mat.
In order to adjust the width, detach the cushions of the seat (9), abduction wedge (13) and thigh support (10) from the base mat (2). Place thigh supports (10) to reach the desired width. Thigh supports (10) have velcro pads at the bottom. Then reposition the abduction wedge (13) and the seat cushions (9). TravelSit page 8 edition 1...
In order to adjust the position of the side support detach the cushions (6) of the backrest along with side supports (7). Move side supports (7) to the desired location and push them firmly to the base mat (2). Side supports (7) have velcro pads in their lower parts. Fig. 5 edition 1 page 9 TravelSit...
You can also change the position of the headrest moving it forward or backward by adding or deducting additional headrest cushions (4). TravelSit page 10 edition 1...
The frame of the lounger is dedicated for the TravelSit system and constitutes the base of the seat. The frame of the lounger enables to place the TravelSit on the floor and this allows the user to play with other peers or perform any other activities from the floor level.
In order to prepare the lounger for use, it is essential to insert the bracket (3) into the frame of the seat (2) and secure it with tabs (5). Then we pull the retarder (4) and lift the backrest (1) until it reaches a vertical position. Then detach the TravelSit seat from the support mat, and connect the TravelSit with the lounger by means of sewn-in velcro pads.
Incidin plus in 0.25% to 0.5% solution, or any similar disinfecting agent. Please follow any usage instructions stated by the manufacturer. NOTE! It is crucial to cleanse the upholstery and handles before performing the disinfection. Nameplate Fig. 11 edition 1 page 13 TravelSit...
The manufacturer determines the product life to be 5 years. The post -warranty service of the device is performed by the manufacturer. Contact details of the service department: LIW Care Technology Sp. z o.o., ul. Golfowa 7, 94-406 Łódź. www.liwcare.pl e-mail: reklamacje@liwcare.pl ...
Page 15
Technology Sp. z o. o 12. After warranty repair, the product will be delivered at the expense of LIW Care Technology Sp. z o. o., to the supplied address. In the event when a correctly addressed package is not collected, the warranty user is obliged to shall bear all costs related to the product transport and its storage.