Cleaning And Maintenance - LIW COCO Instructions For Use Manual

8.5 Chest strap
The chest strap allows for stable patient support at chest height. To release and fasten the belt buckle (1), use the lock button
(2) on the upper part of the buckle. You can mount the chest strap in any hole (4) available. Use knob (6) with spacer (5) and tighten
it. The length of the chest strap can be adjusted by buckle adjuster (3).
9

Cleaning and maintenance

The Coco Stander is a mechanical device with its load-bearing structure made of aluminium and powder coated steel. The
Coco Stander, just like any other medical device, should be kept clean and used according to the recommendations of the
manufacturer. All surfaces of the device should be wiped with a soft, damp cloth. In case of more significant contaminations, it is
possible to use gentle domestic washing agents.
9.1 Recommendations for cleaning and maintenance
Clean paint coatings with a cloth dampened with water. The use of mild agents for cleaning household appliances is allowed.
Guidelines for upholstery washing:
•
Remove sponge inserts from the covers before washing.
•
The covers should be washed by hand or in an automatic (tumble) machine at 30 C.
•
Use PZH-approved detergents for delicate products in quantities specified on the package.
•
For children prone to allergies, use grey soap or special detergents.
•
To remove excess water – use a short spin cycle, do not wring.
•
Drying – hang to dry at room temperature. DO NOT TUMBLE DRY.
CAUTION! WHILE WASHING THE UPHOLSTERY COVERS, PARTICULAR ATTENTION
SHOULD BE PAID TO THE VELCRO FASTENERS. TO PREVENT ANY DAMAGE TO THE
UPHOLSTERY, ENSURE THE VELCRO FASTENERS ARE UNFASTENED DURING THE
WASHING AND THAT THEY DO NOT COME IN TO CONTACT WITH THE UPHOLSTERY.
CAUTION! Do not wash the foam inserts.
Fig. 23
COCO Stander edition 2 page 19