Installing Teratermpro (Version 2.3); Downloading Parameters From The Sy-253 Board - Sony BKMA-U70XGI Manual

1-3. Installing TeraTermPro (Version 2.3)

1-4. Downloading Parameters from the SY-253 Board

1-3. Installing TeraTermPro (Version 2.3)
1. Copy the "Tools/ttermp23" folder and all the folders and files under it that are contained in the CD-
ROM supplied, to TEMP or the desired folder of a personal computer.
2. Click "setup.exe" in the "ttermp23" folder.
TeraTermPro (version 2.3) is installed in a personal computer.
3. Copy the "SY253data" folder in the "Tools/TeraTerm/" in the CD-ROM supplied, to the same folder
where the TeraTermPro (version 2.3) is installed.
n
In order to start up TeraTermPro (version 2.3), click "ttermpro.ex" in the "Ttermpro" folder.
1-4. Downloading Parameters from the SY-253 Board
1. Remove the ornamental panel (A) from the MAV-70.
(Refer to Section 2-2-1 of the Maintenance Manual Volume 1.)
2. Set the switch S3 on the front panel of the MAV-70 to INT.
3. Connect the MAV-70 to a personal computer with the RS-232C cross cable.
Personal Computer
4. Turn on the main power of the MAV-70.
5. Start up TeraTermPro (version 2.3).
6. The Tera Term New connection display appears. Click "serial" and press the [OK] button.
1-2 (E)
RS-232C cable (9P-9P)
COM1
BKMA-U70XGI