Table of Contents
Advertisement
Section 3
Checking Version
Before upgrading the system using the BKMA-U70XGI, check that the versions of the respective option
boards that are installed in the MAV-70XGI are all version 2.50 or higher.
3-1. Equipment Required
(TeraTermPro is contained in the CD-ROM supplied.)
. Personal computer (Windows95/98/2000/NT4.0)
. RS-232C cross cable
. TeraTermPro (Version 2.3)
3-2. Checking Version
1. Remove the ornamental panel (A) from the MAV-70.
(Refer to Section 2-2-1 of the Maintenance Manual Volume 1.)
2. Set the switch S3 on the front panel of the MAV-70 to INT.
Switch S3
3. Connect the MAV-70 to a personal computer with the RS-232C cross cable.
Personal computer
RS-232C cable (9P-9P)
COM1
3-1 (E)
BKMA-U70XGI
Advertisement
Table of Contents
