Uploading Parameters To The Sy-253A Board; Equipment Required - Sony BKMA-U70XGI Manual

Upgrade kit for mav-70

Table of Contents

Section 4

Uploading Parameters to the SY-253A Board

This section describes the procedure to upload the original parameters that are downloaded from the

previous SY-253 board in Section 1, to the SY-253A board.

(The software TeraTermPro and the parameter uploading program are contained in the CD-ROM

supplied.)

. Personal computer (Windows95/98/2000/NT4.0)

. RS-232C cross cable

. TeraTermPro (Version 2.3)

. PutSyPr10.ttl (SY253 DataUpload Macro)

4-2. Uploading Parameters to the SY-253A Board

1. Remove the ornamental panel (A) from the MAV-70.

(Refer to Section 2-2-1 of the Maintenance Manual Volume 1.)

2. Set the switch S3 on the front panel of the MAV-70 to INT.

Switch S3

3. Connect the MAV-70 to a personal computer with the RS-232C cross cable.

Personal computer

RS-232C cable (9P-9P)

COM1

4-1 (E)

BKMA-U70XGI

Table of Contents