Evolur Stellar Manual

Evolur Stellar Manual

Bedside co-sleeper
Hide thumbs Also See for Stellar:

Advertisement

Bedside Co-sleeper
IMPORTANT – KEEP FOR FUTURE REFERENCE. READ CAREFULLY.
• Read all instructions before assembling and using the
product.
• Assemble product according to manufacturer's instructions
for ANY of the uses (co-sleeper or bassinet).
WARNINGS AND THE INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH. DO NOT USE THIS PRODUCT
IF YOU CANNOT EXACTLY FOLLOW THE INSTRUCTIONS
THAT COME WITH IT. THIS PRODUCT SHOULD BE FULLY
ASSEMBLED PRIOR TO USE.
SUFFOCATION HAZARD
Infants have suffocated:
• In gaps between extra padding and side of the
bassinet
• on soft bedding.
Use only the pad provided by Manufacturer. Never add a pillow,
comforter, or another mattress for padding.
• If a sheet is used with the pad, use only the one provided by
Dream On Me or one specifically designed to fit the dimension of
the mattress pad.
• Never leave infant in bassinet with the sides down unless it is
securely positioned in sleeper mode attached to the adult bed with
anchors securely in place.
• To reduce the risk of SIDS, pediatricians recommend healthy
infants be placed on their backs to sleep, unless otherwise advised
by your physician.
ENTRAPMENT HAZARD:
• To prevent death from entrapment, co-sleeper must be properly
secured to adult bed using the attachment system.
• There must be no more than 1/2 inch (13mm) gap between
beside sleeper and adult bed.
• Check tightness before each use by pulling on the co-sleeper
away from the adult bed.
• If gap exceeds 1/2 inch (13mm), DO NOT use product. Do not fill
the gap with pillows, blankets or other items that can cause
suffocation.
FAILURE TO FOLLOW THESE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stellar and is the answer not in the manual?

Questions and answers

Summary of Contents for Evolur Stellar

  • Page 1 FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. DO NOT USE THIS PRODUCT Bedside Co-sleeper IF YOU CANNOT EXACTLY FOLLOW THE INSTRUCTIONS THAT COME WITH IT. THIS PRODUCT SHOULD BE FULLY IMPORTANT – KEEP FOR FUTURE REFERENCE. READ CAREFULLY. ASSEMBLED PRIOR TO USE.
  • Page 2 4 sides. there are any signs of damage. DO NOT substitute parts. ·ALWAYS push adult mattress against beside sleeper after ・ Contact Evolur if replacement parts or instructions are securing to bed with safety strap and anchor plates. needed.
  • Page 3 A3. Adjustable feet with are included in the box when opened. If there are any missing parts, E2. Zip for fabric removal please contact Evolur before using the product. wheels and brakes A4, Non-slip feet E3. Zip for co-sleeping opening A5.
  • Page 4 2. Insert the side rail into the middle support frame (B) by lining up the buttons and holes, until you hear a “Click”, like shown below. DO NOT use bedside sleeper if any parts are missing, damaged, or broken. Contact Evolur for replacement parts and instructions if needed. DO NOT substitute parts.
  • Page 6 TO ADJUST THE HEIGHT 1. The bedside sleeper can be adjusted to different height positions. In order to adjust the height, press the height adjuster THIS METHOD IS ONLY COMPATABLE WITH BED TYPES button (A1) on both sides of the cot to the desired position. THAT COMPLY WITH ALL OF THE CONDITIONS DESCRIBED HERE: •...
  • Page 7 THE HEAD OF THE CHILD SHOULD ALWAYS BE CHECK TO MAKE SURE THAT THE BEDSIDE SLEEPER IN POSITIONED ON THE HIGHEST SIDE. THE CO-SLEEPER MODE DOES NOT INTERFERE WITH THE THIS FUNCTION IS ONLY MEANT FOR THE ADULT BED. BEDSIDE SLEEPER IN BASSINET MODE. DURING USE, MAKE SURE THAT THE ADULT BED SHEETS, BLANKETS ETC, DO NOT ENTER THE CO-SLEEPER AND COVER THE INTERIOR OF THE CO-SLEEPER.
  • Page 8 NEVER USE THIS PRODSIDE IN CO-SLEEPER MODE WITHOUT THE ANCHOR PLATES SECURELY ATTACHED TO THE ADULT BED IN THE CO- SLEEPER MODE , THE TWO LEGS OF THE BEDSIDE SLEEPER SHOULD ALWAYS BE ADJUSTED TO THE SAME HEIGHT. ENSURE THAT THE ANCHORS ARE STRAIGHT.
  • Page 9 CARE & CLEANING Remove the cover: THE ATTACHMENT SYSTEM MUST 1. Remove the mattress and release the velcro tabs from the ALWAYS BE USED IN CO-SLEEPER MODE. middle support frame on the underside of the bedside sleeper. • BEFORE EVERY USE, CHECK TO MAKE SURE THAT THERE IS NO SPACE BETWEEN THE ADULT MATTRESS AND THE SIDE OF THE CO-SLEEPER.
  • Page 10 Facebook and Instagram for further opportunities and offers. indicated on the label. Gracias por elegir Evolur y felicitaciones por unirse a La • For cleaning, do not use solvents, abrasive or aggressive Familia, una familia que se ha estado expandiendo durante 30 products.

Table of Contents