Subscribe to Our Youtube Channel
Related Manuals for PSA Panacom PANAIP7M
Summary of Contents for PSA Panacom PANAIP7M
- Page 1 TCP/IP VIDEO DOOR PHONE QUICK SETUP GUIDE MODEL NO: PANAIP7M / PANAIP7MW / PANAIP7GM...
-
Page 2: Table Of Contents
Main Page If the product emits a peculiar noise, odour or smoke, immediately disconnect the power, and then contact PSA Products. 7. Quick setup Do not insert the power plug into a 240VAC mains socket with a wet hand... -
Page 3: Technical Specifications
1. TECHNICAL SPECIFICATIONS 2. PACKING CONTENTS • 7” capacitive touch screen monitor. Resolution: 800*480 pixels Indoor monitor (PANAIP7M excludes 4 pin wiring cable) • Zone alarms (4-zones max.) • Supports up to 19 door panels • Video Encoding: H.264 • Network Connection: Ethernet (POE) •... -
Page 4: Name And Functions Of Each Part
3. NAME AND FUNCTIONS OF EACH PART 3.1 FRONT AND REAR PART Indoor monitor (Model No: PANAIP7M & PANAIP7MW) Guard unit (Model No: PANAIP7GM) NO. Part Name NO. Part Name Power Indicator White LED when power on Handset Message Indicator White LED flashes when have unread message/call RJ11 Connector Connection for helical handset cable... -
Page 5: Connection Diagram
4. CONNECTION DIAGRAM 4.1 SYSTEM LAYOUT 4.2 WIRING DIAGRAM Remark: • The distance between the PoE Switch and other devices (indoor monitor, door panel, network switch, guard unit) must not exceed 70 meters. is the interface socket for alarm sensors, and is located at the back of the Monitor. Alarm •... -
Page 6: Installation
5. INSTALLATION INDOOR MONITOR GUARD UNIT Standard installation height of door panel puts the lens about 1550mm above the floor. Hence, the centre of the camera should be about 1540mm above ground level. Installing the Guard Unit 1) Place the guard unit on a level desktop; 2) Fix the bracket to the rear of the monitor with screws. -
Page 7: Operation Description
6. OPERATION DESCRIPTION ICON DEFINITION The illustrations in this section are based on Model Nos. PANAIP7MW and PANAIP7GM. The following table shows each icon on the Main Page and its function. 6.1 MAIN SCREEN Touch the screen anywhere in standby mode, the Main Page will be displayed: Enter the call menu Enter the message menu Enter the monitor menu... -
Page 8: Quick Setup
7. QUICK SETUP 7.3 SET UNLOCK PASSWORD Please setup Door Panel before proceeding to the next step. 7.1 ENTER SETUP PAGE The password must be 4 digits and cannot be identical digits (e.g. not ‘3333’ nor ‘8888’ or consecutive numbers (e.g. -
Page 9: Wi-Fi Settings Only For Panaip7Mw Monitor
7. QUICK SETUP 8. USER MANUAL 7.4 WI-FI SETTINGS ONLY FOR PANAIP7MW MONITOR To download User Manual, go to: www.psaproducts.com.au Select Wi-Fi Select Wi-Fi config Select your Wi-Fi on screen and enter Wi-Fi password. Call forward selection: Off - Stop all call forwarding Immediate - Forward call to phone app. - Page 10 17 Millicent Street, Burwood, VIC 3125 Australia Tel: 1300 PSA PRODUCTS (1300 772 776) Fax: (03) 9888 9993 psaproducts.com.au enquiry@psaproducts.com.au...
Need help?
Do you have a question about the Panacom PANAIP7M and is the answer not in the manual?
Questions and answers