Warming Milk; Hot Water - Russell Hobbs 13402 Instructions Manual

frothing
39 For best results, do the frothing straight after you have made your coffee, while the
appliance is still hot.
40 Swing the frother round so it's clear of the drip tray.
41 Bring the mug containing the milk up to the frother and hold it so that the end of
the frother is just under the surface of the milk.
caution
to avoid the risk of scalding, keep fingers, etc. clear of the steam
42 Turn the steam valve anti-clockwise.
43 Steam will start to come out of the frother.
44 Move the jug up and down slightly, keeping the end of the frother just below the
surface of the milk.
45 Don't lift the end of the frother out of the milk, or it'll spatter.
46 When there's enough froth, turn the steam valve clockwise as far as it will go ( S ).
47 Swing the frother back over the drip tray, as it will drip.
48 To make cappuccino, spoon the froth on top of the cup(s) of espresso.
clean the frother
49 You must clean the frother, steam pipe, and nozzle immediately after use, to prevent
milk deposits going hard, and blocking the steam pipe and nozzle. It's also
unhygienic.
50 Hold a cup under the frother, so that the end of the frother is well inside the cup.
51 Turn the steam valve anti-clockwise.
52 Let a little steam through, to remove any milk from inside the frother.
53 Turn the steam valve clockwise as far as it will go ( S ).

warming milk

54 To warm milk for your coffee, follow the procedure for making froth, but immerse
the frother in the milk, so the steam bubbles through the milk, warming it up. Watch
the milk carefully. If you use too much steam, you'll get watery milk.

hot water

55 If you want to use the appliance to generate hot water for tea, or any other drink,
follow the procedure for making froth.
56 Turn the steam valve anti-clockwise.
57 Keep the end of the frother well inside the cup.
58 When you have enough hot water, turn the steam valve clockwise as far as it will go
( S ) to close it.
7