JMQ A7 PLUS Instruction Manual page 16

splash water on the electrical components and under the running
belt.
3. Place your treadmill in a clean, dry environment, make sure the
power is off, and unplug it.
4. In order to facilitate the movement, the treadmill is equipped with
wheels installed. Please confirm that the power is disconnected and
the body is folded before moving.
5. Always check and lock all parts of the treadmill; parts of the
damaged ring must be replaced immediately.
6. In order to better maintain and extend the life of the treadmill, it is
recommended that you rest the treadmill for 10 minutes after 30
minutes of continuous use.
7. The running belt has been adjusted at the factory, but after use,
the running belt will be stretched, will deviate from the center
position and cause the running belt friction strip and the rear cover to
be damaged. It is normal for the running belt to be stretched during
use. After using it for a period of time, if you are running with a
treadmill and it is slippery or not smooth, you can adjust the
tightness of the running belt to improve.
15