Steelcraft Agile Plus SH918 Series Booklet
  1. Manuals
  2. Brands
  3. Steelcraft Manuals
  4. Stroller
  5. Agile Plus SH918 Series
  6. Booklet

Steelcraft Agile Plus SH918 Series Booklet

Reverse handle 4 wheel travel system stroller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Reverse Handle
4 Wheel Travel System Stroller
Suitable for use with the Steelcraft Infant Carrier
or the Britax Click & Go Unity Infant Carrier
(Infant Carriers are sold separately)
IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE.
Series SH918

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Agile Plus SH918 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Steelcraft Agile Plus SH918 Series

Summary of Contents for Steelcraft Agile Plus SH918 Series

  • Page 1 Reverse Handle 4 Wheel Travel System Stroller Suitable for use with the Steelcraft Infant Carrier or the Britax Click & Go Unity Infant Carrier (Infant Carriers are sold separately) IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE.

  • Page 2: Table Of Contents

    CONTENTS Important Notes & Warnings..............4-5 Manual Handling Techniques..............6 Parts List......................7-8 Assembled Stroller Parts List..............9 1. To open the stroller.................10-11 2. To attach and remove the front swivel wheels........11 3. To attach and remove the rear wheels...........12 4. To use the swivel wheels................12 5.
  • Page 3 CONTENTS (Continued) 20. Infant Carrier Warnings and Important Notes....... 41-43 2. To install the Steelcraft infant carrier..........44-46 2. To release the Steelcraft infant carrier..........47-48 Care and Maintenance..................49...

  • Page 4: Important Notes & Warnings

    IMPORTANT NOTES: ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS STROLLER. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. • USE GREAT CARE WHEN USING THE STROLLER ON STAIRS, ESCALATORS, TRAVELATORS OR OTHER MOVING SURFACES. •...
  • Page 5 IMPORTANT NOTES AND WARNINGS (Cont.) WARNINGS: TO AVOID INJURY OR DEATH: ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY. • DO NOT LEAVE CHILDREN UNATTENDED. • SECURE THE CHILD IN THE HARNESS AT ALL TIMES. • DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER. •...

  • Page 6: Manual Handling Techniques

    MANUAL HANDLING TECHNIQUES SMART lifting technique This technique can be used to pick up small light loads from low levels. Size up the Load • Assess the load (size, shape and weight). • Assess whether the load needs to be moved; •...

  • Page 7: Parts List

    PARTS LIST 1 x Stroller Frame, 1 x Canopy Seat & Basket 2 x Front wheels 2 x Rear Wheels 2 x Car Seat Receivers 1 x Child Tray for Steelcraft Infant Carrier...
  • Page 8 PARTS LIST (Cont) 1 x Head Pillow 2 x Shoulder pads 1 x Boot cover 1 x Rain cover...

  • Page 9: Assembled Stroller Parts List

    ASSEMBLED STROLLER - PARTS LIST Handle Tether strap Canopy Front canopy Reverse handle tube lock Cable brake lever Shoulder pads Child tray Harness Folding strap Lower seat Sure lock release button Storage latch Front leg tube Rear leg tube Front wheel release button Basket Foot operated...

  • Page 10: To Open The Stroller

    1. TO OPEN THE STROLLER IMPORTANT NOTES: PLEASE REFER TO PAGE 6 FOR SMART LIFTING TECHNIQUES. • RELEASE THE STORAGE LATCH WITH DUE CARE AND OPEN THE FRAME. • WHEN OPENING THE STROLLER, BE AWARE OF THE DANGER OF BEING INJURED BY MOVING PARTS AND LOCKING DEVICES DURING THE PROCESS.

  • Page 11: To Attach And Remove The Front Swivel Wheels

    1. TO OPEN THE STROLLER (Cont.) Open the frame as shown by the arrows (2) until you hear a ‘click’ which indicates the frame is fully opened and locked. 2. TO ATTACH AND REMOVE THE FRONT SWIVEL WHEELS To assemble the front swivel wheel assembly, insert the swivel wheel assembly and push it into the wheel moulding until you hear a ‘click’...

  • Page 12: To Attach And Remove The Rear Wheels

    3. TO ATTACH AND REMOVE THE REAR WHEELS To attach the rear wheels, insert each wheel axle into the moulding and push in until locked. You should hear a ‘click’ which indicates the wheel has locked in. Pull on the wheel to make sureit is it is engaged.

  • Page 13: To Attach And Use The Canopy

    5. TO ATTACH AND USE THE CANOPY IMPORTANT NOTE: The sun is very strong. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN. The canopy or hood on this product will not give your child total protection from the harmful rays of the sun. To attach the canopy, insert the canopy mouldings into the frame mouldings until they connect together.
  • Page 14 5. TO ATTACH AND USE THE CANOPY (Cont) Attach the hook strip (A) on the inside edge of the canopy to the loop strip (B) on the side of the stroller. To adjust the canopy, open by pulling forward, or close by pushing it backward.
  • Page 15 5. TO ATTACH AND USE THE CANOPY (Cont) To open the canopy window lift the canopy window flap away from the canopy. Canopy window Canopy window flap Canopy back flap zipper To remove the canopy, press in the button on the canopy moulding and pull out of the frame mouldings.
  • Page 16 5. TO ATTACH AND USE THE CANOPY (Cont) For additional air circulation the back flap of the canopy can be removed by opening the zipper. To reattach the back flap to the main canopy secure with the zipper. You can also fold up the back flap and secure with the toggle and elastic.

  • Page 17: To Attach And Use The Child Tray

    6. TO ATTACH AND USE THE CHILD TRAY WARNING: WHEN A CHILD IS IN THE STROLLER KEEP THE CHILD TRAY ATTACHED TO THE ADAPTORS AT ALL TIMES. Stand beside the stroller and pull the fabric back from the sides of the stroller to expose the stroller hinge.
  • Page 18 6. TO ATTACH AND USE THE CHILD TRAY(Cont) To release the child tray, pull the grey tab underneath the tray and rotate the tray. To remove the child tray, push the grey tabs on the adaptors and lift the adaptors and tray until it is removed.

  • Page 19: To Attach And Use The Head Piilow & Shoulder Pads

    7. TO ATTACH & USE THE HEAD PILLOW & TO ATTACH THE SHOULDER PADS To attach the head pillow, release the harness buckles and thread the shoulder straps through the harness slot. The head pillow has a small height adjusting range. Attach the head pillow in the most appropriate position for your child using the hook &...

  • Page 20: To Attach The Boot Cover

    8. TO ATTACH THE BOOT COVER Raise the leg rest, hook boot cover under the leg support and pull the boot cover up. Connect the hook and loop strip around the stroller frame. If the child tray is attached, raise the leg rest, hook boot cover under the leg support and pull the boot cover under the child tray.

  • Page 21: To Attach The Rain Cover

    9. TO ATTACH THE RAIN COVER IMPORTANT NOTE: ENSURE THE RAIN COVER IS KEPT AWAY FROM THE CHILD’S FACE. REFIT THE RAIN COVER IF REQUIRED TO ENSURE YOUR CHILD IS SAFE. PLEASE NOTE: The rain cover can be fitted with the handle in either the forward or reverse position.

  • Page 22: To Adjust The Backrest

    10. TO ADJUST THE BACKREST WARNINGS: • THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR USE WITH CHILDREN LESS THAN 6 MONTHS OLD. • THE LOWEST RECLINE POSITION SHOULD BE USED TO TRANSPORT BABIES. THE BACKREST CAN BE ADJUSTED TO A MORE UPRIGHT POSITION AS THE CHILD GROWS OLDER AND IS ABLE TO SUPPORT ITS HEAD WITHOUT ASSISTANCE.
  • Page 23 10. TO ADJUST THE BACKREST To raise the backrest, hold the main adjuster moulding in one hand, then grasp the plastic rings fixed to the adjuster straps with the other hand. Push up on the main adjuster moulding at the same time pull the adjuster strap to the desired position. To lower the backrest, support the backrest with one hand and with the other hand pull down the on the backrest adjuster button and lower the backrest to the desired position.

  • Page 24: To Adjust The Leg Rest

    11. TO ADJUST THE LEG REST IMPORTANT NOTES: • THE LEG REST FEATURE IS PROVIDED FOR YOUR CHILDS COMFORT. • THE LEG REST IS NOT DESIGNED TO SUPPORT EXTRA WEIGHT. • DO NOT ALLOW CHILDREN TO STAND OR SIT ON THE LEG REST. IT WILL DISENGAGE IF EXTRA WEIGHT IS APPLIED.

  • Page 25: To Adjust The Pivotal Handle

    12. TO ADJUST THE PIVOTAL HANDLE To adjust the handle height, squeeze in and hold the buttons on the inside of the handle. Rotate the handle up or down to the desired position then release the buttons.
  • Page 26 13. TO USE THE REVERSE HANDLE IMPORTANT NOTE: WHEN A CHILD IS IN THE STROLLER, ENSURE THEIR FINGERS ARE NOT ON THE TRAY/ARM BAR WHEN MOVING THE HANDLE. Please Note: When making adjustments to the handle position you must also adjust the position of the wheels. See Section 4 - To use the swivel wheels.

  • Page 27: To Use The Brakes

    14. TO USE THE BRAKES IMPORTANT NOTE: THERE ARE TWO BRAKING SYSTEMS ON THIS STROLLER, THE REAR WHEEL BRAKE PEDAL IS USED WHEN THE HANDLE IS BEHIND THE STROLLER IN THE CHILD FACING AWAY FROM PARENT MODE. THE CABLE BRAKE LEVER ON THE HANDLE IS USED WHEN THE HANDLE IS IN FRONT OF THE STROLLER IN THE PARENT FACING CHILD MODE MODE.
  • Page 28 14. TO USE THE BRAKES (Cont) CABLE BRAKE LEVER To lock the rear wheels, gently pull cable brake lever up towards the handle until it locks into place. Check that the brakes have locked by trying to push the stroller forward. If not locked, repeat this step.

  • Page 29: To Use The Tether Strap

    15. TO USE THE TETHER STRAP WARNINGS: USE THE TETHER STRAP TO STOP THE STROLLER ROLLING AWAY. • THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING SURFACES, AND MAY BE UNSTABLE ON HIGHER SLOPING AND UNEVEN SURFACES AND USERS SHOULD BE AWARE OF THE POSSIBILITY OF THE STROLLER ROLLING AWAY OR TIPPING OVER.

  • Page 30: To Secure Your Child In The Harness

    16. TO SECURE YOUR CHILD IN THE HARNESS WARNING: USE THE HARNESS AT ALL TIMES. • ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED HARNESS. • THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD. • NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN THE STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY POSE A STRANGULATION HAZARD.
  • Page 31 16. TO SECURE YOUR CHILD IN THE HARNESS (Cont) Always apply the brakes. Place child in seat. Slip one shoulder strap over each shoulder. Position crotch strap between legs. Push the buckle tongues (A) on waist straps through the tongue guides (B) on shoulder straps.
  • Page 32 16. TO SECURE YOUR CHILD IN THE HARNESS (Cont) Press in and hold the centre crotch buckle button and insert the waist buckle tongues into the crotch buckle assembly. IMPORTANT: Pull on each waist buckle tongue to make sure they are locked into the crotch buckle assembly.
  • Page 33 16. TO SECURE YOUR CHILD IN THE HARNESS (Cont) Tighten or loosen the waist straps, hold and lift the 4 bar harness adjuster and pull the harness strap to adjust to the desired fit. The waist strap needs to fit firmly around the child. 4 bar harness adjuster...
  • Page 34 16. TO SECURE YOUR CHILD IN THE HARNESS (Cont) The stroller seat has *2 or 3 sets of harness slots at different heights to accommodate the child. The shoulder straps must be positioned near the child’s shoulders. To change the shoulder harness height, push the shoulder harness tongue out of the current harness slot and through the back of the seat and then pull the shoulder harness buckle tongue through the desired...

  • Page 35: To Use The Stroller

    17. TO USE THE STROLLER PLEASE REFER TO PAGE 6 FOR LIFTING TECHNIQUES. • Always ensure you bend your knees where appropriate and take due care when lifting the frame. • With your hand through the wrist tether strap loop, push the stroller holding the handle.

  • Page 36: To Fold The Stroller

    18. TO FOLD THE STROLLER IMPORTANT NOTES: PLEASE REFER TO PAGE 6 FOR LIFTING TECHNIQUES. • REMOVE THE CHILD FROM THE STROLLER BEFORE COMMENCING ANY FOLDING OPERATION. • FOLD THE STROLLER SLOWLY AND BE CAREFUL WHERE YOU PLACE YOUR HANDS. •...
  • Page 37 18. TO FOLD THE STROLLER (Cont) To prevent the canopy back flap from dragging on the ground when the stroller is folded, either (A1) remove the back flap by opening the zipper at the top of the back flap, then close the canopy, or (A2) tuck the bottom of the canopy back flap into the...
  • Page 38 18. TO FOLD THE STROLLER (Cont) Canopy back flap tucked into mesh pocket Before folding stroller ensure leg rest is in the lowest postion and ensure the pivotal handle is in the highest position. PLEASE NOTE: When folding the stroller, lower the leg rest all the way down so the hook &...
  • Page 39 18. TO FOLD THE STROLLER (Cont) 17. TO FOLD THE STROLLER (Cont) Press the RED Sure Lock release button (1) located on the right hand side of the stroller. With the other hand pull up the folding strap (2) as shown by the arrow. The stroller will now fold. Lock the frame together with the storage latch.

  • Page 40: To Lift And Carry The Stroller

    19. TO LIFT AND CARRY THE STROLLER...

  • Page 41: Infant Carrier Warnings And Important Notes

    SOUND UNITY INFANT CARRIER IS NOT TO EXCEED 12kg. IMPORTANT NOTES: • THE STEELCRAFT INFANT CARRIER AND THE SAFE N SOUND UNITY INFANT CARRIER ARE THE ONLY COMPATIBLE INFANT CARRIERS DESIGNED TO FIT THE AGILE, AGILE PLUS & AGILE TWIN STROLLERS •...
  • Page 42 NOT GIVE YOUR CHILD TOTAL PROTECTION FROM THE HARMFUL RAYS OF THE SUN. IMPORTANT NOTE: TRAY (supplied) OR ARMBAR (sold separately) BEFORE INSTALLING THE STEELCRAFT OR UNITY INFANT CARRIER ON THE STROLLER, THE ARMBAR OR TRAY MUST BE REMOVED. PLEASE NOTE: THESE INSTRUCTIONS ARE FOR INSTALLING AND REMOVING THE INFANT CARRIER ON THE STROLLER ONLY.
  • Page 43 19. INFANT CARRIER WARNINGS & IMPORTANT NOTES (Cont) (Infant Carriers sold separately) INSTALLATION OF UNITY INFANT CARRIER IMPORTANT NOTES: • AGILE CLICK & GO RECIEVERS (sold separately) ARE REQUIRED FOR INSTALLATION OF THE 40A/2010 SERIES & 40A/2013 SERIES SAFE N SOUND UNITY INFANT CARRIER TO THE AGILE STROLLER. •...

  • Page 44: To Install The Steelcraft Infant Carrier

    20. TO INSTALL THE STEELCRAFT INFANT CARRIER Stand in front of the stroller and pull the fabric back from the sides of the stroller to expose the stroller hinge. Take one car seat receiver at a time and insert the receiver into the stroller hinge as shown.
  • Page 45 20. TO INSTALL THE STEELCRAFT INFANT CARRIER (Cont) Lower the Infant Carrier into the receivers. Press down firmly on both sides. The Infant Carrier now needs to be locked securely into the receivers. Squeeze in and hold the latches on either side of the handle, rotate the handle backwards.
  • Page 46 20. TO INSTALL THE STEELCRAFT INFANT CARRIER (Cont) Release the handle latches. Then with one hand holding the front of the Infant Carrier, push the Infant Carrier handle all the way down until you hear it lock into the receivers. The handle indicator should now be GREEN and the Infant Carrier should be locked into the receivers.

  • Page 47: To Release The Steelcraft Infant Carrier

    21. TO RELEASE THE INFANT CARRIER To remove the Infant Carrier, squeeze both handle latches in to release the locks. The indicator will now be RED. Indicator Handle latch CAUTION Continue to rotate the handle forward until it returns to the upright position.
  • Page 48 21. TO RELEASE THE INFANT CARRIER Lift and remove the Infant Carrier away from the stroller. To remove the receivers, press the red button in on the inside of the receiver and pull the receiver up. Receiver Red Button...

  • Page 49: Care And Maintenance

    CARE AND MAINTENANCE • To prolong the life of your stroller keep it clean and do not leave it in the direct sunlight or in the car boot for extended periods of time. • Removable fabric covers and trims may be cleaned using warm water with a household soap or mild detergent.
  • Page 50 Due to our continuing program of development, Britax Reserves the right to alter these specifications, colour or design without any further notice. The Steelcraft trademark is the property of Britax Childcare Pty. Ltd - Australia. The Britax trademark is the property of Britax Childcare Holdings Limited - UK Visit the Britax website www.britax.com.au or email is at au-custserv@britax.com...

Table of Contents