Use And Operation - Honeywell MN Series User Manual

USE & OPERATION
CONTROL PANEL
(1)
1) Timer Control
2) Fan Speed Control
3) Timer / Temperature Set Controls
FUNCTION BUTTONS
POWER CONTROL
The Power Control turns the unit on and off. When the unit is plugged in, this button lights up indicating it
is in a Standby Mode ready to be switched on anytime.
MODE CONTROL
Settings: Air Conditioning, Heating*, Dehumidifying, Fan.
The corresponding indicator light will illuminate to indicate the current mode setting.
•
Air Conditioning Mode
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 16°C - 32°C (61°F - 89°F).
Ambient temperature range is 16°C - 35°C (61°F - 95°F).
• Dehumidifying Mode
Air is dehumidified as it passes through the unit, without being in full cooling mode.
If room temperature is higher than 25°C (77°F) fan speed can be adjusted; otherwise fan speed is
preset to LOW.
Note: If the unit will be used mainly as a dehumidifier, do not connect the exhaust hose.
Continuous drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).
(2) (3) (3)
4) Mode Control
5) Power Control / Standby Mode
6) Warning Light (when flashing)
*Applicable for models with Heating feature only.
EN 7
(4) (5) & (6)