Table of Contents
Advertisement
• Lift operation by trained authorized personnel over 18 years only.
• Apply the parking brake after positioning the vehicle on the lift.
• Do not allow anyone to stay in lift area during raising and lowering cycles.
• Closely watch the vehicle and the lift during raising and lowering cycles.
• Observe the rated load capacity and load distribution.
• Do not allow anyone to climb on lift or stay inside vehicle.
• Before raising and lowering the lift, always secure the vehicle with wheel chocks.
• Make sure the vehicle doors are closed during raising and lowering cycles.
6.1 DEFECTS/MALFUNCTIONS
In case of defects or malfunctions such as jerky lift movement or deformation of
the superstructure, support or lower the lift immediately.
Turn off the power and Contact qualified service personnel.
6.2 CONTROLS
UP CONTROL
Once the up button (Fig. A) is pressed, the lift moves up until the button is released or the
limit stop is reached.
LOWERING CONTROL
Press Up button enough to make the safety lock blocks disengage the safety stops on the
columns. Pull and hold the safety lock release handle, and then press the lowering handle
(Fig B) at same time, until the lift is completely lowered.
6-OPERATION INSTRUCTIONS
17
Advertisement
Table of Contents
