Page 1
I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation J-Series Static Arm Extension Kit Spanish Product Description German Product Description Portuguese Product Description...
WARNING: Exceeding the weight capacity can result in Chief® is a registered trademark of Milestone AV Technologies. serious personal injury or damage to equipment! It is the All rights reserved. installer’s responsibility to make sure the combined weight of all components attached to this accessory does not exceed 75 lbs (34 kg).
Page 3
Installation Instructions MAC1003 TOOLS REQUIRED FOR INSTALLATION AND PARTS A (1) D (1) C (1) E (1) (5/16-18) B (1) G (1) F (2)
Page 4
MAC1003 Installation Instructions Installation Install Extension Arm Slide spacer (C) onto pivot pin (B). (See Figure 2) Prepare Existing Mount Insert pivot pin (B) with spacer (C) into top of existing arm IMPORTANT ! : until pivot pin (B) is resting on bottom of recessed area in The hardware removed during Centris head arm.
Page 5
Installation Instructions MAC1003 Install Extension Arm Using hardware set aside after Centris head removal: Slide spacer (C) onto pivot pin (B). (See Figure 3) Insert pivot pin (B) with spacer (C) into top of existing arm until pivot pin (B) is resting on bottom of recessed area in (D) x 1 arm.
Page 8
F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 Chief Manufacturing, a products F +31 (0)40 2668615 division of Milestone AV Technologies Asia Pacific A Office No. 1 on 12/F, Shatin Galleria...
Need help?
Do you have a question about the J Series and is the answer not in the manual?
Questions and answers