Package Contents; Markings On Tool; Description (Fig. A); Assembly And Adjustments - DeWalt DCS571 Original Instructions Manual

EnGLIsh
Do not incinerate the battery pack.
Battery Type
The DCS571 operates on a 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189. Refer to
Technical Data for more information.

Package Contents

The package contains:
1 Cordless circular saw
1 24‑tooth blade
1 Hex key
1 Rip guide
1 Dust extraction port
1 Kitbox (NT, C, D, L, M, P, S, T, X models)
1 Charger (C, D, L, M, P, S, T, X models)
1 Li‑Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.

Markings on Tool

The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code , which also includes the year of manufacture,
15
is printed into the housing.
Example:
36
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of
it. Damage or personal injury could result.
Trigger switch lock‑off
1
button
Trigger switch
2
Battery pack
3
Depth adjustment lever
4
Shoe
5
Lower blade guard
6
retracting lever
Intended Use
Your cordless circular saw has been designed for professional
wood sawing applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This circular saw is a professional power tool.
DO nOT let children come into contact with the
tool. Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool Handle
1. Align the battery pack
3
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button
out of the tool handle.
Lower blade guard
7
Blade clamping screw
8
Kerf indicator
9
Bevel adjustment knob
10
Blade lock button
11
Auxiliary handle
12
Battery release button
13
Hex key
14
WALT battery packs and chargers.
e
is fully charged.
3
with the rails inside the tool's
and firmly pull the battery pack
13