Nescafe Milano Combi Operation Manual

Product Replenishment/Filling The Canisters
C1
1. Unlock door using the key and lift coffee machine lid/roof.
2. Roast & Ground Canister (C1):
- Lift lid off canister, fill with NESCAFÉ R&G Beans, replace lid
3. Soluble Canisters (C2, C3, C4):
- Close powder chute, press down the orange/burgundy clip
- Remove canisters from machine and take lids off canisters
- Fill with Soluble products:
- C2 = NESTLÉ Milano Hot Chocolate
- C3 = NESTLÉ Milano Skimmed Milk Product
- C4 = NESCAFÉ Milano Ispirizione Coffee
4. Replace canister lids and put canisters back in machine
5. Open (orange/burgundy) powder chutes – VERY
IMPORTANT!
6. Close machine door and lock.
7. Perform Rinse (see below).
Perform Rinse (x 3 Times a Day)
We would recommend that you rinse your machine at least 3 x
times a day:
• First thing, before dispensing any drinks
• After refilling canisters
• After cleaning machine
1. Place 0.5 litre jug, or large cup, under dispense outlet.
2. Scroll along to cleaning screen, by pressing the light blue
box on the bottom right of the touch screen.
3. Press Clean Icon to start rinse.
4. The automatic rinsing will start by rinsing dispense hoses,
nozzles and mixing bowls.
NESCAFÉ Milano "Combi" Coffee Machine
Summary Operational Guide (Page 1 of 2)
C2 C3 C4
DAILY Cleaning Procedure
PART 1 – MACHINE SHOULD BE "TURNED OFF"
1. Remove all internal parts from machine:
- Unclip nozzles, unlock/pull off mixer bowls and impellor:
(a), (b), (e) and (f)
- Remove steam trap (g)
- Remove product chute (h)
- Remove drip tray, empty contents (i)
- Remove grounds drawer, empty contents (j)
2. Using a Food Grade Sanitiser
i) Clean all internal parts, then rinse in warm water and dry.
ii) Wipe over interior and exterior of machine
3. Reassemble internal parts back in machine, as per their
original position (with the exception of the drip tray and
grounds drawer – replace these after following Part 2 below).
DAILY Cleaning Procedure
PART 2 – MACHINE SHOULD REMAIN "OFF"
1. Remove Brewer from machine and rinse under warm running
water, to clear excess grinds:
- Unclip dispense nozzle from dispense head (k - not pictured)
- Remove safety cover (l)
- Remove orange carter off grinder dispense (m)
- Remove brewer - pull orange clip towards you, lift brewer
unit up/towards you (n).
(m)
(l)
2. Reassemble parts on to machine (n), (m), (l) and then (k)
- (n) If not locked in, twist
3. Replace grounds drawer and drip tray.
4. Close door and turn machine back on.
5. Perform Rinse.
Bolt
Brewer/
Orange Clip)
(n)
UK / Version 3 / July 2019