Operate The Aircraft - C-Fly DF805 Quick Start Manual

5). Connect with APP
(1). Indications of GPS signal state when connecting with APP
The aircraft's indicator light turns solid green when the aircraft connects wit the APP, which indicates strong GPS signal and
successful positioning. Switch the flight mode to position hold mode and then let it take off.
That the aircraft's indicator light turns blinking green indicates weak or no GPS signal. Switch the flight mode to altitude
mode (complicated operations, suitable for experienced pilot).
Note: It is highly recommended to fly under good GPS signal (Green light always on)!
Please choose wide and open flight environment. Tall steel buildings and metal materials will interfere
the signal of the compass and the GPS.
(2). Connect with APP
Open your mobile phone, navigate to settings and then the WLAN:
When flying with the APP, click the network of "Drone-xxxxxx (serial
number)" to connect the drone to the APP. In this situation, the
drone has a relatively shorter range.
When flying with the controller, click the network of "Controller-
xxxxxx (serial number)" to connect the drone to the remote
controller. In this situation, the drone has a relatively longer range.
Open the APP to enter the interface as shown in the left picture.
Click "Start Flying" to enter the operation interface as below.
Note: The aircraft can only connect to 5G Wi-Fi enabled mobile phone.
Use the APP to monitor the shooting footages and the flight condition in mid-flight. It is able to use both
of the remote controller and the APP to control the aircraft. However, some functions are not support
on the APP when the controller being used except these functions, including taking photos or videos,
follow me mode, point of interest mode or waypoint flying mode.

6). Operate the aircraft

(1). Takeoff
○ Method 1: takeoff manually
When the aircraft's light turns from blue to green, toggle the left
and right joysticks towards toe-out for at least 3 seconds to get the
propellers started to rotate.
Slowly toggle the throttle joystick upward to control the aircraft to
take off quickly, and then toggle the throttle joystick to let it ascend
gradually.
○ Method 2: one key takeoff
Long press the "One Key Takeoff/ Landing" button for 2 to 3 seconds. When the remote controller beeps B-B-B, the
aircraft will automatically take off and ascend to hover at the altitude of 1.2 meters.
4
DF805