Installation Preparation - Monogram ZV830 Installation Instructions Manual

ADVANCE PLANNING
outdoors.
air system in accordance with local building code
requirements.
CAUTION
To reduce risk of fire and to properly
WARNING
POWER SUPPLY
IMPORTANT – (Please read carefully)
WARNING
Remove house fuse or open circuit breaker before
beginning installation.
local codes and ordinances.
Electrical supply
breaker or time delay fuse.
proceeding.
accordance with local codes.
4

Installation Preparation

transition needed in advance.
Wall Framing for Adequate Support
must be provided in all types of installations. The hood
horizontal support.
and wall finishing. This will help to accurately locate
the duct work and electrical service.
before the cooktop and countertop are installed.
ACCESSORY DUCT COVER
This hood is shipped with a decorative duct cover for
accessory is available to reach ceiling heights between
the hood and be on site before installation begins.
Grounding instructions
The grounding conductor must be connected to a
equipment-grounding terminal or lead on the hood.
WARNING
The improper connection of the
equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the
appliance is properly grounded.
CAUTION
reduce the risk of injury disconnect from power supply
before servicing. This unit is equipped with an integral
disconnecting switch located inside the blower housing.
49-80512 Rev. 4