Intended Use Of The Machine; General Safety Rules; General Rules - Bassra Machine Tools BMT 2000 User Manual

4. Intended Use of the Machine

The BMT 2000 is designed for use by the Double Glazing Industry.
We recommend the use of Bostik Products when operating this machine. Please note
the address of Bostik supplier: -
Bostik (UK) Ltd
Ulverscroft Road
Leicester
LE4 6BV
Tel: +44 (0) 116 251 0015
Fax: +44 (0) 116 253 1943
Our company will not be liable for the usage of any material other than that specified.

5. General Safety Rules

Your BMT 2000 machine has been built to the latest engineering standards. It is safe
and reliable if properly operated. Safety has been a major design consideration.
However, any machine can be a source of potential danger if improperly handled or
operated by unqualified, untrained and careless personnel, or if used outside the
scope of its intended use.
Be sure to observe all instructions given in this manual and strictly comply with all
local safety and accident prevention rules and regulations.

General Rules

• The machine should be operated, maintained and repaired by authorised and fully
trained personnel that have been thoroughly instructed about potential hazards. No
one should be allowed to operate or be near this machine unless he or she is both
physically and mentally alert.
• The owner should clearly establish the responsibilities for assembling, disassembling
and reassembling the machine, or putting the machine into operation, setting up,
operating and servicing the machine.
BASSRA MACHINE TOOLS LTD.
99 Spring Road, Tyseley, Birmingham, United Kingdom, B11 3DJ
Tel: 0044 (0) 121 707 4343 / Fax: 0044 (0) 121 707 3535
Website: www. bassra.com / Email: sales@bassra.com