Transport And Storing; Maintenance And Service - Kellfri 13-VM360E Instructions Manual

TRANSPORT AND STORING

Make sure there are no people, children and foreign objects around the area before transport-
ing the machine. Always take an extra caution during the transport. Ensure that the product
is well secured and that transport brackets are mounted. Always place the load as low as pos-
sible. Respect the danger zone even during transport. When lifting the equipment, never go
underneath suspended loads. Trailer used for transport should have working brakes.
Always store the machine in a dry place preferably underneath a cover when not in use. Ensure
that the product is stable and not likely to tip over. Never let children play where the machine
is being stored. Always keep in mind the risk of tipping!

MAINTENANCE AND SERVICE

Ensure that the unit is stable and cannot tip over during maintenance and service. Replace
damaged or worn parts immediately to reduce the risk of abrasion. Always perform mainte-
nance, service and inspection, as recommended. Use only original replacement parts or spare
parts with equivalent performance to reduce the risk of damage. All repairs and connections
with electricity must be performed by a qualified person.
Check all nuts and bolts are tightened after performning maintenance and service.
Always test the machine before using it.
It is the operator's responsibility to ensure that all the bolts are thightened regularly. Checked
and tightened if necessary.
Warning!
Maintain safety during product life.
Dangerous accidents may occur when:
Improper maintenance or removal of
safety devices. Follow the instructions carefully!
17