Advertisement
Make sure that the VTFI is turned on.
Make sure that the Timer Record Function is set to "On".
Select the programme number to be checked, by repeated-
ly pressing the ChecldProgramme Button.
The preset channel and start and ending llmes of the timer
recording will be indicated for about 12 seconds.
, !
i
o t r
l i i
' : i !
; : : : . i D
i i . . . i . . ! ; . . . ;
(start time)
(4 seconds)
' : : : i :
:....
i D
OFF
+
j
i : ' i t i
(next 8 seconds)
giEt
Make sure that:
the VTR is turned on,
the Timer Record Function is set to "Off".
O Press the Check/Programme Button repeatedly, until
the number of the timer programme that you want to
cancel is displayed.
@ Press the "+" and " " Button simultaneously lor more
than 3 seconds.
.When the Timer Record Function is set to "On", the
WR is turned off, the Timer Record Indicator "8"
will be displayed, and only the timer is left operatlng.
.lf no cassette is inserted in the VTR, the "@" Mark
will flash.
.After the programmed timer recording has been
made, set the Timer Record Function to "Off",
otherwise the VTR cannot be operated normally.
.During recording, the programme position (channel)
on the VTR cannot be changed.
.When you want to watch TV after setting a timer
recording, select lhe desired channelon the TV set.
.To cancel a tlmer recording during recording, set the
Timer Record Function to "Off".
.lt is impossible to confirm programmes of timer
recordings while an OTR is being per.ormed.
.To turn the VTR on and use it for playback or
recording before the timer recording js performed,
set the Timer Record Function to "Off".
.When the Timer Record Function is set to "On" but
no video cassette is inserted or no timer recording
has been programmed, the Timer Recording Indi-
cator E will flash to inform that the timer recordino
cannot be performed.
Advertisement
