Air Filter And V-Belt Case Air Filter Elements - Yamaha MIO AL115S 2010 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
3. Place an oil pan under the final
transmission case to collect the
used oil.
4. Remove the final transmission oil
filler cap and its O-ring from the fi-
nal transmission case.
5. Remove the final transmission oil
drain bolt and its gasket to drain
the oil from the final transmission
case.
7
ZAUU0058
1. Final transmission oil drain bolt
6. Install the final transmission oil
drain bolt and its new gasket, and
then tighten the bolt to the speci-
fied torque.
Tightening torque:
Final transmission oil drain bolt:
22 Nm (2.2 m·kgf, 16 ft·lbf)
7. Refill with the specified amount of
the recommended final transmis-
sion oil. WARNING! Make sure
that no foreign material enters
the final transmission case.
Make sure that no oil gets on
the tire or wheel.
[EWA11311]
Recommended final transmission oil:
See page 9-1.
Oil quantity:
0.12 L (0.13 US qt, 0.11 Imp.qt)
8. Install the final transmission oil fill-
er cap and its new O-ring, and
then tighten the oil filler cap.
9. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
7-12
Air filter and V-belt case air
filter elements
The air filter element should be
checked and replace if necessary and
the V-belt case air filter element should
be cleaned at the intervals specified in
the periodic maintenance and lubrica-
tion chart. Service the air filter elements
more frequently if you are riding in un-
usually wet or dusty areas.
Checking and replacing the air filter
element
1. Place the vehicle on the center-
stand.
2. Remove the air filter case cover by
removing the screws.
EAUU0332