Page 1
NEWARK TV BED ASSEMBLY INSTRUCTIONS Thank you for purchasing the NEWARK TV BED. Please read the instructions carefully to ensure safe operation of the product. Size: 4'6 Double 2190mm x 1445mm x 1090mm 5' King 2290mm x 1595mm x 1090mm...
Page 2
NEWARK TV BED ASSEMBLY INSTRUCTIONS IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. INFORMATION This product is intended for a maximum person’s weight of 130kg per side. Do not exceed this weight. This product complies with the essential requirements of the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC...
Page 3
NEWARK TV BED ASSEMBLY INSTRUCTIONS Please check the pack contents before assembling the product. If any components are missing, please contact your retailer. The fittings pack contains small items that should be kept away from small children. Button Nylon Restraint Strap Batch No.
Page 4
NEWARK TV BED ASSEMBLY INSTRUCTIONS Parts Description: HEADBOARD Description: FOOTBOARD Description: SIDERAIL (Left & Right) Qty: 1PC Qty: 1PC Qty: 2PCS Size: 4ft6: 1445 x 1040 x 70mm Size: 4ft6: 1445 x 760 x 200mm Size: 4ft6: 1920 x 200 x 30mm...
Page 5
NEWARK TV BED ASSEMBLY INSTRUCTIONS 10 20 30 40 50 60 70 80 90 100 Fittings (to scale) Dimensions Bolt - M8 x 15 ( Already pre-fixed on the footboard ) Bolt - M8 x 30 Bolt - M8 x 35...
Page 6
NEWARK TV BED ASSEMBLY INSTRUCTIONS Do not attempt to move the bed whilst the TV mechanism is in upright position. When moving be careful not to damage or trip over any wires or electrical components that may be attached to the bedframe or mechanism Batch No.
Page 7
NEWARK TV BED ASSEMBLY INSTRUCTIONS Layout Parts on Soft Surface Lay out all 4 sides on a soft surface i.e.Rug.Carpet or Packaging Carton Batch No. :V2 -08/19 Page 7 of 19...
Page 8
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 1 PARTS REQUIRED H. Flat Washer x 4 D. Bolt M8 x 50mm x 4 M. Allen Key M5 x 1 1.Headboard x 1 6.Headboard Leg x 2 STEP 2 PARTS REQUIRED H. Flat Washer x 4 E.
Page 9
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 3 PARTS REQUIRED H. Flat Washer x 8 Fit the bolts to the headboard and footboard loosely G. Spring Washer x 8 B. Bolt M8 x 30mm x 8 10mm Batch No. :V2 -08/19...
Page 10
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 4 PARTS REQUIRED M. Allen Key M5 x 1 Fit all sides together, slide and hook on the side rails to the bolts on the headboard and footboard and then tighten bolts 1.Headboard x 1 2.Footboard x 1...
Page 11
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 5 PARTS REQUIRED A. Bolt M8 x 15mm x 2 B. Bolt M8 x 30mm x 2 C. Bolt M8 x 40mm x 4 I. Flat Washer x 4 F. Nut M8 x 4 O.
Page 12
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 6 PARTS REQUIRED To keep the cables tidy and reduce risk of damage, attach the straps to L. Screw M3 x 20mm x 4 the side rails as illustrated to hold the cables in place.
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 7 Connecting The Power Connect the TV lift up Power cord from the control boxand to the main supply (extention lead might be needed) . The mains supply must be fully earthed and be easy to reach if you need to diconnect the power.
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 8 Installing Your TV When selecting a TV for this bed please ensure the dimensions and fixing pints are compatible Max Size: Suitable for TVs with overall dimensions upto W750 x H450 x D60mm...
Page 15
NEWARK TV BED ASSEMBLY INSTRUCTIONS PARTS REQUIRED Before fitting your TV to bracket, please check your TV dimensions. K. Flat Washer x 4 Maximum dimensions of TV that can be used in this bed: J. Bolt M4 x 15mm x 4 P.
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 9 Fitting the Cables TV Lift Mechanism AV Ethernet Wire Power Cord HDMI Ethernet Wire Additional cable outlets for additional electrical connections AV /HDMI Ethernet Wire Power Cord AV /HDMI Ethernet Wire Power Cord...
Page 17
NEWARK TV BED ASSEMBLY INSTRUCTIONS It is important that after the initial fitting of your TV, all cables including aerial HDMI, TV power and any auxiliary cables that you fit yourself, are securely positioned close to the back of the TV using the cable clips and cable ties provided.
Page 18
NEWARK TV BED ASSEMBLY INSTRUCTIONS STEP 10 Fitting slats PARTS REQUIRED Q: End Slat Cap 4’6 x 24 5' x 26 R: Centre Slat Cap 4’6 x 12 5' x 13 8.Slats 4’6 x 24 5' x 26 Batch No. :V2 -08/19...
NEWARK TV BED ASSEMBLY INSTRUCTIONS Complete Assembly Your Newark TV Bed is now completely assembled. Periodically check to ensure that the components are in their proper position, free from damage. Also, make sure the connectors are tight and secure. Keep instructions for future reference Batch No.
Need help?
Do you have a question about the NEWARK TV BED and is the answer not in the manual?
Questions and answers