Table of Contents
Advertisement
C
Power On
Step 1:Use AC power (100V~240V, 50Hz/60Hz) as the product power source. Make
sure the power plug fully inserted and that the ground wire of the outlet is
properly connected.
Step 2: Turn on the rocker switch (on the rear side of the screen, next to the power
socket) after a power source has been connected. The power indicator should
be red.
Step 3: Press the "
control to start the product (the indicator light turns green).
Power Off
Step 1: Press the "
on the front panel to turn the power off. The indicator light turns red.
Step 2: If you want to completely turn off the product, turn off the rocker switch under
the product (next to the Power socket) and unplug the power cord.
rocker switch next
to the power socket
" button on the product or the "
" button on the remote control or press and hold the "
15
Power On/Off
" button on the remote
" button
Advertisement
Table of Contents
