Vertical Installation - NewLine VNC Series Quick Start Manual

Load Bearing
You can select moveable installation or wall mounting according to your own needs.
Wall mounting can help users significantly reduce occupied space.
When using moveable installation, use the mobile stand specified by the manufacturer.
If you use a self-made mounting bracket, its carrying capacity should be at least 4 times
the actual carrying weight. The carrying capacity of the support table should be at least
4 times the actual carrying weight, and the product shall be stably mounted.
When using wall mounting, the mounting surface carrying the product should be
strong enough to bear at least 4 times the actual carrying weight. When the mounting
surface is the wall or roof of a building, it must be solid brick, concrete or a mounting
surface of equivalent strength. If the mounting surface is loose (such as old-style brick
walls, wood, solid brick walls, etc.), or a metal or non-metal structure, or if the surface
decoration layer is too thick and obviously insufficient in strength, reinforcement and
support measures should be implemented to prevent potential safety hazards.

Vertical installation

◆
When installing, try to keep the product vertical. The vertical tilt range allowing for wall-
mount installation is ±3 degrees. Excessive tilt angle may cause the screen glass to fall
off or the product to collapse.
Note
• In case of screen glass breakage, keep all personnel 3 meters away from the screen to
ensure safety.
• Do not perform any installation or disassembly when the screen glass is broken or falls off.
• For any problem, please contact our support desk. Our company is not responsible for any
damage or losses incurred by users if the users fails to follow the instructions.
12