oticon Opn Series Instructions For Use Manual page 37

Description of symbols and abbreviations used in this booklet
Warnings
Text marked with a warning symbol must be read before using the device.
Manufacturer
The device is produced by the manufacturer whose name and address are stated
next to the symbol. Indicates the medical device manufacturer, as defined in EU
Directives 90/385/EEC, 93/42/EEC and 98/79/EC.
CE mark
The device complies with Medical Device Directive 93/42/EEC.
The four digit number indicates the identification of the notified body.
Electronic waste (WEEE)
Recycle hearing aids, accessories or batteries according to local regulations.
Hearing aid users can also return electronic waste to their hearing care
professional for disposal. Electronic equipment covered by Directive 2012/19/EU
on waste and electrical equipment (WEEE).
Regulatory Compliance Mark (RCM)
The device complies with electrical safety, EMC and radio spectrum requirements
for devices supplied to the Australian or New Zealand market.
IP code
Indicates the class of protections against harmful ingress of water and particulate
matter according to EN 60529. IP6X indicates total dust protection. IPX8 indicates
the protection against the effects of continuous immersion in water.
72 About Start-up Handling Options Tinnitus Warnings More info
Bluetooth logo
Registered trademark of Bluetooth SIG, Inc. where any use of such requires a
license.
Made for Apple badges
Indicates that the device is compatible with iPhone, iPad and iPod touch.
Hearing loop
This logo incorporates the universal symbol for hearing assistance.
The "T" signifies that a hearing loop is installed.
Radio Frequency (RF) transmitter
Your hearing aid contains an RF transmitter.
Global Trade Item Number
A globally unique 14-digit number used to identify medical device products
GTIN
including medical device software. GTIN in this booklet is related to medical
device firmware. GTIN on regulatory packaging label is related to medical device
hardware
73