Medel MYO TENS LT3062E User Manual page 42

Dual channel electronic muscle stimulator
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25
EN
PROBLEM
The unit cannot power on
Stimulation weak or cannot feel any
stimulation
Stimulation is uncomfortable
100275_MYO-TENS_USER MANUAL_REV.00.indd 42
POSSIBLE CAUSES
Are the batteries exhausted?
Are the batteries installed correctly?
Electrodes are dried out or dirty.
Electrodes do not stick to skin well.
Lead wire is old, worn, or damaged.
Intensity is too high.
Electrodes are too close together.
Electrode active area size is too small.
Is the device being operated according
to the manual?
42
POSSIBLE SOLUTION
Replace the batteries.
Insert the batteries observing polarity.
Replace with new electrodes.
Replace with new electrodes.
Replace with new lead wire.
Intensity is too high. Decrease intensity.
Reposition electrodes to be at least 2 inches apart.
Replace electrodes with ones that have an dia no less
than 2 in.
Please check the manual before use.
08/08/2019 15:15:02

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Medel MYO TENS LT3062E

Table of Contents