Saving A Pattern Combination - Janome Continental M7 Professional Instruction Book

w
r
q
e
t
y
i u

Saving a Pattern Combination

The pattern combination and monogram can be saved
as a file in the machine's internal memory or a USB flash
drive.
The machine has a USB port for USB flash drive.
Press the save file key after programming a pattern
combination, and the save file window will open.
q Save file key
Select the location to where you wish to save the pattern
combination.
The "Ordf" folder is shown.
Select the "Ordf" folder and the file name is assigned
automatically starting from C_001.....in order.
Press the OK key to save the file under the assigned
name.
w File name
If you wish to assign a unique name to the file, press the
rename key and the keyboard window will open.
e Rename key
If you wish to use QWERTY layout keyboard, press the
keyboard tab.
r ABC tab
t Keyboard tab
Enter a new name and press the OK key to change the
file name.
Press the OK key and the file is saved under the new
name.
NOTE:
• The files and folders are displayed on different
pages.
• This model supports FAT16 and FAT32 formats
only. If the USB flash drive is not read, check the
format of it.
• Do not use a USB card reader and USB hub.
Creating a new folder
Select a location for a new folder and press the new
folder key. The keyboard window will open.
Enter a folder name and press the OK key.
The new folder is created under the assigned name.
y New folder key
Deleting a file or folder
Press the delete key and select the file or folder to delete.
A confirmation message appears.
Press the OK key to delete the file or folder.
u Delete key
Changing the folder name or file name
Press the rename key and select the folder or file of
which you wish to change its name. The keyboard
window will open.
Enter the new name and press the OK key.
The name of the folder or file will change.
i Rename key
95