Janome Continental M7 Professional Instruction Book page 127

!7
!8
!9
@0
@2
@1
!6 Clean Bobbin Holder Message displayed every 5
hours
The caution message for cleaning the bobbin holder and
the hook race will be displayed when the certain time (5
hours) passes if this option is turned on.
The caution message will not be displayed when this
option is turned off.
Press the next page key to show the next menu.
!7 Touch Screen Calibration
You can calibrate the key positions of the touch screen if
you feel the touch screen key is not responding properly.
Press the calibration key
window.
Press the "+" sign with the touch panel stylus as the sign
appears.
When you press the last sign, the screen shows "END"
and the calibration window will close.
!8 Needle Plate Lifter Time Setting
You can set the needle plate lifting time between 2-6
seconds.
Press the next page key to show the next menu.
!9 Standby Timer
The sewing lights will turn off and the machine will enter
standby mode if you do not use the machine within the
time period set by this timer. Doing any operation will turn
the lights and screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the "+" key
until "OFF" shows in the timer window.
@0 Screen Saver
Press the ON/OFF key to turn on the screen saver, and
the visual touch screen will show the screen saver when
the machine is in standby status.
Press the import key to import a screen saver from a
USB flash drive.
You can create an original screen saver with Screen
Saver Tool included in the PC Application Pack CD-ROM.
The imported screen saver data will be deleted if the
delete key is pressed, or the internal memory is
formatted (refer to page 126).
@1 Import key
@2 Auto-off Timer
The machine will be automatically turned off if you do not
use the machine within the time period set by this timer.
The auto-off timer can be set from 1 to 12 hours.
If you wish to turn off the timer, press and hold the "+" key
until "OFF" shows in the timer window.
To turn on the machine again, turn the power switch on.
Press the next page key to show the next menu.
125
to open the calibration