Threading The Machine - Janome Continental M7 Professional Instruction Book

z
q
w
v
b
v
y
n
!0
e
x
t
c
b
u
i
o

Threading the Machine

CAUTION:
Always make sure to press the lockout key to lockout
the machine before threading the machine.
z Press the needle up/down button to raise the take-up
lever to the highest position.
Press the lockout key to lockout the machine.
q Needle up/down button
w Thread take-up lever
e Lockout key
r
x Pass the thread through the guide on the thread guide
bar from behind.
r Thread guide bar
c Pass the thread through the right thread guide.
t Right thread guide
v Hold the upper thread with both hands as shown
and slip it under the thread guide plate.
y Thread guide plate
b Draw the thread toward you and pass it into the left
thread guide.
u Left thread guide
n Draw the thread down along the right channel and
around the bottom of the thread guide plate.
Pull the thread up along the left channel.
i Right channel
o Thread guide plate
!0 Left channel
29