6.2
Mounting
Caution! The device can sustain damage when coming into contact with
hard objects!
The plastic parts of the device are sensitive.
–
–
Hinweis
Elektronische Geräte mit integriertem Schaltnetzteil können im Einzelfall
Empfangsstörungen verursachen, wenn diese in unmittelbarer Nähe zum Radio
montiert werden.
The flush-mounted insert must only be installed in flush-mounted wall boxes according to DIN
49073-1, Part 1, or suitable surface-mounted housings.
To mount the device, perform the following steps:
Fig. 1:
Wall mounting: pulling off the attachment
Fig. 2:
State of the device at the point of delivery:
pulling off the attachment
Product manual 2CKA001473B8722
Pull the attachment off only with your hands.
Do not lever parts off with screwdrivers or similar hard objects.
Connection, installation / mounting
1. Pull the attachment off.
–
If the device is already mounted
or assembled, pull off the
attachment from the flush-
mounted insert with the aid of the
frame.
–
If the state of the device is at the
point of delivery, pull off the
attachment from the flush-
mounted insert with your hands.
–
Pull the attachment off only with
your hands!
–
Do not lever parts off with
screwdrivers or similar hard
objects. This damages the
device.
–
When pulling off, first the
resistance of the spring clamps
must be overcome.
│14