In addition to the integrated antenna, an external antenna can be connected to the connection
provided.
intern
extern
Fig. 3:
Selecting the antenna connection
Fig. 4:
Connecting the cables
Fig. 5:
Mounting the flush-mounted insert
Product manual 2CKA001473B8722
Connection, installation / mounting
2. For the selection of the antenna set
the switch on the rear of the device
on "Internal" or "External".
–
Connecting lamps or electronic
transformers to the same phase
can cause interference to
reception. In this case, always
use an external antenna.
3. Connect the cables to the flush-
mounted insert.
–
For the connection assignment,
see chapter 6.3 "Electrical
connection" on page 17.
4. Mount the flush-mounted insert.
│15