Alarm Clock - Busch-Jaeger AudioWorld 8215 U Product Manual

8.2.7

Alarm clock

Fig. 37: Menu item "Switching the alarm clock on / off"
The alarm call function is switched on or off via this menu.
This function can only be called up in standby mode when the radio is switched off. If the radio
is switched on you would change to the device settings.
Activating the alarm call function
1. Press the "PROG" button for at least 3 seconds.
– The "Alarm clock" icon appears in the display.
– The alarm call function is activated.
Deactivating the alarm call function
1. Press the "PROG" button for at least 3 seconds.
– The "Alarm clock" icon is removed from the display.
– The alarm call function is deactivated.
NOTE
After the device has been set up, this menu is only available when the alarm call
function has been set on "Active" in the basic settings, see chapter 7.2.4 "Menu
"Alarm clock"" on page 23, and when the alarm time has been set, see chapter
8.3.3 "Menu "Alarm time"" on page 37.
Product manual 2CKA001473B8722
Operation
│35