Sd Card Quick Configuration - Delta DX-2100 Series User Manual

D X-2 100 Se ri es Ind ustr ia l 3G C lo ud Ro u ter
3.6

SD Card Quick Configuration

DX-2100RW provides the multiple quick configurations via SD Card.

Upgrade the device firmware
 Import the device configuration
 Active the device with the DIACloud account.
The SD Card quick configurations will triggers by the following file is created in the SD card after the DX-2100RW reboots:
 The upgrade-package file 'DX2100_UpgradeImage_NorFlash_xxxx_xxxx.bin'
 The device configuration files 'backup.cfg'. (Please refer 3.4.8 Backup & Restore)
_3
 The cloud configuration file 'Provision.bin' (Please refer to the following steps).
1. Go to the DIACloud platform (DIACloudSolutions.com).
2. Log in the DIACloud webpage and click "SECURE TUNNELS"
3. Click to select the Network which you'd like to use and then click the
4. Click the
5. Copy Provision.bin file to SD card.
Power off the device and then insert the SD card into the device (SD card slot below the SIM card slot, on the right side of
the device). Turn on the device and it will automatically bind. Check the SD card status indicator to see if the binding is
successful.
The following beep codes are for SD Card Quick Configurations, its definition that the various combinations of the
configuration file exist on SD card. (× – fail, √ - success or not this operation)
Beep Code
1 long
3 - 5 8
to download the generated Provision.bin to the local computer.
Upgrade.bin
×
to see and check the details.
backup.cfg Provision.bin
√ √