D X-2 100 Se ri es Ind ustr ia l 3G C lo ud Ro u ter
Service Type
Set up the protocol type for port triggering.
Triggering Port
Set up the triggering port. The port range is 1~65534.
Protocol Role
Set up the protocol type for the inbound connection.
Begin port
_3
Set up the starting port for the inbound connection. The port range is 1~65534.
End Port
Set up the ending port for the inbound connection. The port range is 1~65534.
Status
Enable/disable the port triggering functionality.
3.3.5
URL Filter
This page is used for setting up the URL Filter, including configuring the URL Address, LAN IP Address and Status.
URL Filter is used to block particular website from the local network. Select Enable/Disable to activate/deactivate this
functionality. Click the "Add An URL Address" to block the URL.
After clicking the "Add An URL Address", you will see the following page.
3 - 2 2
Description
Description
Default
TCP
N/A
TCP/UDP
N/A
N/A
Disabled
Default