Advertisement
To begin installation, shut down your computer.
step
1
Connect the Comwave Internet Modem using the
step
2
supplied telephone cord to the phone jack.
Connect the supplied Ethernet Cable from the
step
3
LAN port of the Comwave Internet Modem to your
computer.
(For Home Phone)
step
4
cable from the LAN port of your Comwave Internet
Modem to the WAN port of the Home Phone
Adapter.
Connect the Comwave Internet Modem to a power
step
5
outlet.
Note:
to be operational.
(For Home Phone)
step
6
PHONE 1 port on the Home Phone Adapter. Then
connect power to the Home Phone Adapter and
wait 5 minutes for a dial-tone.
DO NOT DISCONNECT POWER
Home Phone Adapter.
Start your computer. You should be able to browse
step
7
the Internet instantly.
5.
Connect the supplied Ethernet
Please allow up to 5 minutes for your modem
Connect a telephone to the
as it may damage the
Can't Access
the Internet?
1
Unplug the power to your
Comwave Internet modem,
home phone adapter and
shut down your computer.
2
Wait 30 seconds and then
plug your Comwave Internet
modem's power cord back
into the power outlet.
3
Wait until the LED light
indicators on your Comwave
Internet modem indicate the
modem is operational. This
may take up to 5 minutes.
4
Start your computer and
plug in the home phone
adaptor into a power outlet.
5
Open your browser and start
surfing the Internet. Check
for a dial tone.
Still unable to surf the Internet?
Call us at 1-866-210-9149.
WE'LL GET YOU BACK UP ONLINE!
Advertisement
