Nikon Optiphot Repair Manual page 96

R-4106.A
REASSEMBLY PROCEDURE 1. B·tube
9) Stick prism
@
to righteye sleeve
~
using No. 200 l. Apply this adhesive in a ring ali
around the top edge of
@.
and inserting
@
into
@,
rotate it several times.
10) Attach
<1Q§)
to prism base @with washer
~
and screws
@
x2
transitorily.
Thereafter, screw in cover ring@ into
c:I:QP.
(After posicional adjustment, stick it with
No. 350)
11) Attach lefteye sleeve
@
to prism base
CIQD
with washer
@
and screws
@x
2
transitorily. Thereafter, screw in
<@
into
@.
(After adjustment, stick it with No. 350)
12) Stick plates
c@x2
to light
incidence and exit surfaces of
~
, @
with adhesive
No. 2002. Apply the adhesive
in a ring anta the attachlng
surfaces of the stop plates.
After about 30 minutes, attach
them to the prisms. Apply
black paint to the groove and
attaching parts as shown in Fig. 19.
Fig. 19
Attaching
part
Coincide
the edges.
13) Stick light stop plate@ onto the light incidence surface of prism
@
in the sarne
way as
mentioned in 12).
14) Attach prisms
ª·
@
to
e@
and
fix
them with
plastic
screw
@
transitorily.
( After positional adjustmen t,
stick them using
No.
2001.)
(Fig. 20)
- 26-
..-----....,..--{-
"-
-
- -
...,
'\~'
j
------~
Fig. 20