Reassembling The Handle - Nikon Optiphot Repair Manual

R-4108.A
REASSEMLBING PROCEDURE
<
Reassembling the Handle
>
(Fig. 9)
J)
1nsert the X pinion with the axle
(§>@
into the assembly of the pinion cover(V and the
pinion bearing
@ .
Placing the washer
@
in between.
Lubrica.~
@CD])
with the oi! G7910 and
@
wtth the oil G7920.
2) Fit the assembly of the Y pinion
@
and the Y knob
@
to the bearing
@
inserting the
washer@.
3) Put the Delrin washer
@
x 1,
the wave washer
@
and the tlat washer
@
x 1
on the bearing
@
in following order:
@
-+
@ . . . , . @ .
4) Screw on the round nut
@
and the lock nut
@
to the bearing
@
to hold the Y knob on the
bearing. The turning torque of the Y knob is to be adjusted by means of these nuts.
5) Put the tlat washer
@,
the wave washer
@
and the Delrin washer
@
on the axle
e@
in
the following order:
@
-+
@ - @.
6) Screw on the X knob
@
to the axle
(@.
7) Put the washer@ and screw on the nut
@
to the axle
@.
The tuming torque of the X·knob is to be adjusted by means of the nut
@.
r;~·.
Fig. 9
-9-