After Use; Maintaining The Machine; Cutting Blade And Drive End - Maaselan Kone Oy Hakki Pilke 37 Series Instructions For Assembly, Operation And Maintenance

The acceleration valve accelerates the splitting motion by 33%.
NOTE! Speeding up the splitting motion reduces the splitting force.
Warning! Never leave the acceleration valve's adjustment bolt fully closed! Open the bolt at least one
rotation from the closed position.
1. After you have finished making firewood, shut down the machine and remove the firewood from
the splitting groove and conveyor.
2. Ensure that the machine has not been damaged.
3. Place the output conveyor into a position that allows the conveyor and log splitter to be moved
safely away from the processed firewood.
4. Use your tractor's hydraulics to hoist the log splitter and move it to a location where you can place
the input and output conveyors into their transport and storage positions.
5. Place the conveyors into the transport and storage position.
6. Clean and maintain the machine.

6 Maintaining the machine

The splitter must be disconnected from its power source before maintenance, adjustment, replacement
or cleaning procedures. Only use spare parts supplied by the manufacturer or your retailer. If the guards
of the machine need to be removed for maintenance, they must always be reattached before activating
the machine. The splitter must be test run according to the instructions in Section 4.1 after maintenance
and adjustment measures.

6.1 Cutting blade and drive end

If the machine's cutting blade does not properly penetrate the wood or the cut is skewed, the blade chain
is most likely dull. It is a good idea to keep a replacement chain handy so that you do not need to
interrupt your work for sharpening the chain.

5.12 After use

40
Original Version 1-2011