Operation Of The Valve/Splitting Levers - Maaselan Kone Oy Hakki Pilke 37 Series Instructions For Assembly, Operation And Maintenance

1. In the initial position, the jointed
lever is in the middle position.
2. The spring presses the
jointed lever to the right.
4. When the splitting beam
is near the splitting blade,
the valve lever turns to the
right forcing the spring to
press the jointed lever to
the left. This returns the
splitting beam to the
starting position.

5.10 Operation of the valve/splitting levers

38
3. After cutting the wood, when the cutting
lever is lifted up, the trigger lever is also raised
lifting up the trigger rod. When the trigger rod
is up, the spring presses the jointed lever to the
right enabling the splitting motion to begin.
Venttiilivipu
Original
5. When the jointed
lever is on the left, the
trigger lever and trigger
rod are lowered to the
initial position.
Valve lever
Version 1-2011