Operating And Adjusting The Input Conveyor - Maaselan Kone Oy Hakki Pilke 37 Series Instructions For Assembly, Operation And Maintenance

4.6 Operating and adjusting the input conveyor

The conveyor stops when the
cutting lever is lowered to the
initial position or when wood
is cut by pushing the lever
downwards. In the Easy
model, the conveyor stops
when the control lever B is
restored to the centre
position or when the lever is
pulled backwards.
28
The input conveyor is activated
when the cutting lever is moved up
from its initial position. Note! In the
Easy model, the conveyor can be
activated with the control lever B
(in Figure 20) by pushing the lever
to the up/right position.
To reverse the input conveyor belt,
press the reverse pedal E. In the
Easy model, the same can be done
by moving the control lever B to the
up/left position.
Original Version 1-2011