Note! Inspect and clean the machine according to Sections 2.1 and 9.0 before arranging it for transport.
3.2
Retain the split pin of the locking handle and the locking handle of the support.
TO PLACE THE CONVEYOR IN THE TRANSPORT POSITION, REVERSE THE ORDER OF THE
MEASURES COMPLETED TO PALCE THE MACHINE IN THE OPERATING POSITION!
REMEMBER THAT THE LOCKING HANDLE LOCKS THE SUPPORT IN PLACE!
3.3 Placing the output conveyor in the operating position
Placing the input conveyor in the operating or transport
position
1. Remove the split pin
from the locking handle.
3. Lower the conveyor to a
horizontal position, and
insert the conveyor support
in the slots in the lower
section of the machine's
frame.
16
Original
Locking handle
2. Remove the
locking handle
from the
support.
Version 1-2011