Fm Radio - auna 10030588 Instructions Manual

Playback information
While a station is playing, the display shows its name and DLS information
(Dynamic Label Segment). This gives you real-time information such as the
name of the programme or the name of the title. Stereo broadcasts are
marked at the top of the screen. Press Info repeatedly for more information.
Settings
Dynamic Range Compression: If you listen to music with a wide dynamic
range in a noisy environment, it may be useful to compress this range.
This makes soft sounds louder and loud sounds quieter. The compression
options are Off, Low or High.
Station order: Here you can set the order of the DAB stations.

FM RADIO

The FM radio mode receives analogue radio signals and the display shows
RDS (Radio Data System) information about the station.
Press OK to find a station. The frequency display appears when the
unit searches the FM frequency band. Alternatively, you can search the
frequencies by pressing and holding < or >, or you can change quickly from
station to station by pressing the buttons briefly or turning the navigation
dial.
Station Presets
• Press and hold Preset to add a station to the memory. After a short
time, the display will show you the memory screen. Select one of the 10
available presets.
• Press Preset to access the preset stations. When a preset station is
playing, the display will show P1-P10. Use the P1-P10 buttons on the
remote control to access the preset stations.
EN
55