auna 10030588 Instructions Manual page 46

EN
Network
Network Wizard:
Search for your SSID and connect by entering the WEP/WPA password or
select one of the other connection types and authentication methods (Push/
Pin/Skip) to connect to your wireless LAN.
PBC:
Select PBC to go directly to the push button configuration.
View settings (View/Settings):
View information on the currently connected network: Active Connection,
MAC Address, W-LAN Region, DHCP, SSID, IP Address, Subnet Mask,
Gateway Address, Primary and Secondary DNS.
W-LAN region:
Select the appropriate region to obtain the best possible connection.
Manual setting:
Choose between wireless or wired network and enable/disable DHCP
(Dynamic Host Configuration Protocol)
Network profile:
The device remembers the last 4 wireless networks it was connected to
and automatically tries to connect to one of them if one of them is found.
Here you can view the list of saved networks. You can remove unwanted
networks by selecting them, pressing Select and confirming the deletion.
Maintain network connection:
Activate this option to keep the Connect connected to the W-LAN even in
standby mode. This allows the Connect to be ready for DLNA streaming
even in standby mode.
46