Specifications; Specifications Of The Click & Go Professional Ii; Components Of The Click & Go Professional Ii; The Push Handles - Faaborg Rehab Technic Click & Go Series User Manual

4. Specifications

Below, you will find the specifications of the Click & Go Professional II.
4.1
Specifications of the Click & Go Professional II
Total length:
Total width:
Total height:
Total weight:
User weight:
Available colors:
Suitable for seat width:
Speed:
Drive wheels:
Battery:
Weight battery:
Radius of action:
5. Components of the Click & Go Professional II
In this chapter the different components of the Click & Go Professional II is described. On the
push propulsion are a number of components present which are adjustable. If you want to
add or remove any of its components, make any adjustments or replace components, you
should always follow the instructions described in this user manual.
5.1

The push handles

The push handles of your Click & Go Professional II are ergonomically designed. On photo 2
you see the push handle of the Click & Go Professional II. Because the push handles are
ergonomically designed, your attendant has a good grip on the push handles. As a result,
pushing the push propulsion by your attendant is not only more comfortable, but the push
propulsion and the wheelchair can also be pushed safer. The push handles of the push
propulsion is height adjustable (see paragraph 5.4).
Smedemestervej 9 |5600 Faaborg | Denmark | T: +45 710205553 | E: office@faaborg-rehab.dk| W: www.faaborg-rehab.dk
46 cm
36 cm (including the covers on both sides)
Lowest level: 91 cm / highest level: 117 cm
22.53 kg
Max. 135 kg
Blue and grey
40 cm to 60 cm
Max. 5.5 km/u
200 x 50 mm
2 x 12V / 12 Ah
7.2 kg
15 km
Photo 2
© 2015 Click&Go, Faaborg Rehab Technic ApS
7/15